株式会社スリーエス

CE E/P positioner

Features

◆Compact and lightweight
◆The cam can be detachable with levers on.
◆Split range available.
◆High endurance for vibration.
◆Easy zero-span adjustment.
◆Easy maintenance.
◆4 to 20 mA feedback signal function available (optional).
CE E/P positioner

 

Specs

Specs standard option
Input Signal 4 to 20 mADC / 250Ω
Supply air pressure 0.14 to 0.7 MPa
Stroke 10 to 100 mm (option: 3 to 10 mm) / 60 to 90°
Air connection Rc1/4
(Gauge Rc1/8)
NPT1/4
(Gauge NPT1/8)
Power Connection G1/2 NPT1/2
Pressure gauge 0 to 0.2 MPa
0 to 0.4 MPa
0 to 1.0 MPa
Enclosure protection level IP65 (IEC529-1989)
Construction Non-explosion proof
Flameproof: Ex d II BT6
Intrinsically safe: EEx i aIIC T4, T5, T6
Cam Linear Non-linear
Ambient temperature Standard: -20 to 83 ℃
(Flameproof: -20 to 60 ℃)
Low Temp. -50 to 60 ℃
High Temp. 0 to 100 ℃
Material Body: Aluminum Diecasting (Special Anodize)
Standard cover: Aluminum Diecasting (Special Anodize)
Weight Single acting: Approx. 2.2 Kgs
Double acting: Approx. 2.3 Kgs

———————————–

Specification

Specs Single acting Double acting
Linearity ±1.5 %
Hysteresis 1.0 %
Repeatability 0.5 %
Sensitivity 0.5 %
range of supply air 0.3 % /0.01 MPa
resistance against vibration 1 % / 1 G
Air consumption
(Nl/min)
5 / 0.14 MPa
at Output pressure 50 %
11/0.4MPa
at Output pressure 75 %
Max Cv.
(Nl/min)
180 to 200 Nl / min. / 0.4 MPa
Attention for usage of pneumatic instruments
* Clean and dry air (dew point -30 or below) is required.
* Air filter 5μm or smaller is required.

All specifications are subject to change without prior notice.
All figures are effected by the valve/actuators.

COPYRIGHT(C) 2017 3S CO.,LTD. ALL RIGHT RESERVED.